Wuxi Yushun Metallurgical Technology Co., Ltd.
Wuxi Yushun Metallurgical Technology Co., Ltd.
Add to Cart
35t/h Walking Beam Continuous Heating Furnace Feeder End Charging and Discharging Product
Feature of Rotary Copper & Aluminum Melting Furnace
(1) As an energy saving metal furnace,our product is one of the most clean energy recognized by the state environmental protection department.
(2) Furnace body structure is very strong with good material.
(3) Internal grade refractory material is very durable .
(4) Equipped with aluminum water leakage alarm power-off device.
(5) Temperature control system uses the artificial intelligence temperature controller, the temperature is accurate,the intellectualized control.
(6) Our Aluminum melting furnace is easy to operate.
Main technical parameter
Technical performance table
| No. | Item | Unit | Value |
| 1 | Usage | Heating before billet rolling | |
| 2 | Heating steel grade | Ordinary carbon steel, low alloy steel, high quality carbon steel, excellent special steel | |
| 3 | Standard billet size | mm | (150×150-380×380)×(4600-6100) |
| 4 | Single weight of billet | kg | 767--6420 |
| 5 | Heating temperature | ℃ | 1030~1150 |
| 6 | Furnace output | t/h | Rated 35 (cold charging) |
| 7 | Effective bottom strenght | kg/m2.h | Rated 465 |
| 8 | Fuel type | Natural gas | |
| 9 | Low calorific value of fuel | kJ/Nm3 | 8500±100x4.18 |
| 10 | Charging temperature | ℃× | Cold charging: normal temperature |
| 11 | Unit heat consumption | kJ/kg billet | 300×4.18(cold charging) |
| 12 | Gas consumption | Nm3/h | 1260 |
| 13 | Air consumption | Nm3/h | 12600 |
| 14 | Flue gas amount | Nm3/h | 13860 |
| 15 | Heating method and burner | Low nitrogen burner, side wall of heating section, upper wall of soaking section | |
| 16 | Air heat exchanger type | Metal tubular convection heat exchanger with plug | |
| 17 | Air preheating temperature | ℃ | 350 |
| 18 | Walking beam cooling method | Water cooling | |
| 19 | Consumption of cooling water | m3/h | 300 |
| 20 | Walking mechanism transmission mode | Hydraulic | |
| 21 | Walking parameter | mm | Step pitch:270 |
| Lifting: 100+100 | |||
| 22 | Walking period | sec | 35 |
Energy medium requirements
| Flow | Pressure | Heat value | Requirement | |
| Natural gas | 1600Nm3/h (connection point) | ~8000Pa (There is a pressure stabilizer for air supply in the workshop)
| (8500±100)x4.18kJ/Nm3 | |
| Nitrogen for piping purging | 100 m3/time
| 0.25 MPa | ||
| Gas for pneumatic mechanism
| 200 m3/h | 0.6 Mpa | no oil, water removal | |
| Gas for instrument | 50 m3/h | 0.6 Mpa | no oil, water removal, the impurity particle is not larger than 5um
| |
| Clean circulation water for furnace equipment | 100 m3/h | 0.4 Mpa | ||
| Turbid circulation water for water seal and slag flushing system
| 30 m3/h | 0.25Mpa | ||
| Accident water
| 150 m3/h | 0.2Mpa |
Technical performance table
| No. | Item | Unit | Value |
| 1 | Usage | Heating before billet rolling | |
| 2 | Heating steel grade | Ordinary carbon steel, low alloy steel, high quality carbon steel, excellent special steel | |
| 3 | Standard billet size | mm | (150×150-380×380)×(4600-6100) |
| 4 | Single weight of billet | kg | 767--6420 |
| 5 | Heating temperature | ℃ | 1030~1150 |
| 6 | Furnace output | t/h | Rated 35 (cold charging) |
| 7 | Effective bottom strenght | kg/m2.h | Rated 465 |
| 8 | Fuel type | Natural gas | |
| 9 | Low calorific value of fuel | kJ/Nm3 | 8500±100x4.18 |
| 10 | Charging temperature | ℃× | Cold charging: normal temperature |
| 11 | Unit heat consumption | kJ/kg billet | 300×4.18(cold charging) |
| 12 | Gas consumption | Nm3/h | 1260 |
| 13 | Air consumption | Nm3/h | 12600 |
| 14 | Flue gas amount | Nm3/h | 13860 |
| 15 | Heating method and burner | Low nitrogen burner, side wall of heating section, upper wall of soaking section | |
| 16 | Air heat exchanger type | Metal tubular convection heat exchanger with plug | |
| 17 | Air preheating temperature | ℃ | 350 |
| 18 | Walking beam cooling method | Water cooling | |
| 19 | Consumption of cooling water | m3/h | 300 |
| 20 | Walking mechanism transmission mode | Hydraulic | |
| 21 | Walking parameter | mm | Step pitch:270 |
| Lifting: 100+100 | |||
| 22 | Walking period | sec | 35 |
Packaging Details: Wooden case packing or nude packing
Port: Tianjin
Lead Time:
| Quantity(Sets) | 1-1 | >1 |
| Est.Time(Days) | 30 | To be negotiated |
specification