Wuxi Yushun Metallurgical Technology Co., Ltd.
Wuxi Yushun Metallurgical Technology Co., Ltd.
Add to Cart
150T MT Ladle Refining Furnace
The ladle refining furnace is used for refining molten steel. There are several structures for user’s selection: heating bridge type, fourth column type, arm rotating type and ladle turret type. Ladle refining furnace comprises ladle, ladle car and towing cable, furnace roof, electrode lifting mechanism, secondary busbar water-cooling device hydraulic device, argon device, furnace transformer, HV cabinet LV electric and automatic control system, etc. Capacity of LF manufactured by our company is 10-300t.
Parameter
| No. | Product name | Unit | Data | Remarks |
| 1 | Block of LF furnace | seat | 1 | |
| 2 | To deal with every steel water | 1 | 60 | 70 max. |
| 3 | LF furnace transformer rated capacity | MVA | 1.2 | 20% overload |
| 4 | Primary voltage | KV | 35 | |
| 5 | Secondary voltage | V | 270-250-170 | No-loading adjust voltage 6 grade |
| 6 | Secondary current | A | 27700 | |
| 7 | Heating rate | ℃/min | 4.0 | Max. 6.0 |
| 8 | Electrode diameter | mm | 400 | UHP |
| 9 | Average refining cycle | min | 35 | |
| 10 | Electrode moving distance | mm | 2500 | |
| 11 | Electrode moving speed | M/min | 3-4 | |
| 12 | Refining ladle car load | T | 150 | |
| 13 | Refining ladle car speed | M/min | 12 | |
| 14 | Furnace hearth diameter | mm | ∅2500 | 60t molten steel surface |
| 15 | Ladle upper diameter | mm | ∅3000 | |
| 16 | Ladle height | mm | 3700 | |
| 17 | Free space height | mm | 450 | 60t molten steel surface |
| 18 | Cooling water inlet | ℃ | ≤34 | |
| 19 | Temperature rise | ℃ | ≤15 | |
| 20 | Cooling water flow | M3/h | 200 | |
| 21 | Water pressure | MPa | ≥0.35 | |
| 22 | Power supply | V | 35000(380-220) | High voltage(IOW) |
| 23 | Frequency | Hz | 50 | |
| 24 | Compressed air | Mpa | ≥0.4 | No water no oil |
Function
1. Electric arc heats up and temperature rises under constant pressure, measure temperature and take samples, finally temperature control is accurate so as to optimize casting temperature.
2. Synthetic slag goes through refining, desulfuration, deoxidation, degasification and removal of inclusions
3. Bottom blowing argon siring. make liquid steel temperature uniform and make components uniform and pure.
4. Alloy fine adjustment makes component controlled accurately. The finally required chemical composition could be achieved with high efficiency through ferroalloy element or aluminum or wire feeding.
5. Being equipped with wire feeder makes liquid steel realize desulfuration and deoxygenation, changes inclusion pattern and distribution and accurately controls alloy elements. And it has high alloy yield, low temperature drop and low environmental pollution.
6. As buffering equipments between primary melting furnace and continuous casting machine, ensure matching production of primary meting furnace and continuous casting, realize sequence casting.
Characteristics
1. Adopting the water cooled furnace roof equipped with dedusting interface of which the size of smoke outlet is adjustable to keep the tiny barotropic atmosphere and reducing atmosphere inside the furnace.
2. Using the cooper-steel composited conductive arm, reducing electrode pitch circle diameter and prolonging lining service life.
3. Equipped with automatic or manual temperature measurement and sampling device to measure the liquid steel temperature accurately.
4. Large current system adopts large-section water cooled cable, compensators and copper-steel composite conducive arm, thus reduce major loop impedance.
5. Using alloy and slag automatic charging device to accurately measure the charging volume.
6. Equipped with PLC control system and smelting model.
Selling Units: Single item
Single package size: 150*100*170cm
Single gross weight: 100,000kg
Package Type: Safety Seaworthy Package
Lead Time:
| Quantity (Tons) | 1-100 | >100 |
| Est. Time(Days) | 60 | To be negotiated |